International standards
World-class quality assurance

Participate in multiple overseas projects

Participate in multiple overseas projects

British brand
Zero rejection from global consultants

Extensive experience in overseas project submission

Extensive experience in overseas project submission

Perfect combination of creativity and technology
Each cable is made as per demand

Special cable customization service

Special cable customization service
HomeProuductsRolling Stock Cables

EN 50306 Thin Wall Instrumentation & Control Rolling Stock Cable
FIREROL FRL-TW-05MP-SW-IOS

EN 50306 Thin Wall Rolling Stock Cables FRL-TW-05MP-SW-IOS

A.Conductor B.Insulation C.Screen D.Sheath

Application

-Used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor.

-Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards and control panels, driver desks etc.

Construction

Conductor
Tinned annealed copper wires as defined in EN 50306-2

Insulation
LSZH special compound

Overall screen
Tinned annealed copper wires

Pair screen
Individual screened and sheathed. Screened according to EN 50306-3; Sheathed according to EN 50306-3 (S1. S2)

Pair Identification
Pairs numbered according to EN 50306-4

Outer sheath
LSZH special compound (S2. EM 101 - EM 104)

Electrical & Mechanical Properties

Nominal Voltage 300/500 V
Maximum Conductor Temperature +90/+105 deg (fixed installation)
Minimum Permissible Ambient Temperature -25/-40 deg (fixed installation)
Bending Radius 10 x Overall Diameter

Chemical & Environmental Properties

EN 60684-2 No fluorine
EN 50305; EN 60811-2-1 Resistance to oil & fuel
EN 50305 Resistance to ozone

Fire Performance for rolling stock application

EN 50306-2 Hazard levels HL1, HL2, HL3
DIN 5510-2 Protection level 1/2/3/4
BS 6853 Interior use 1a, 1b, II; Exterior use 1a, 1b, II
NF F 16-101 F0
EN45545-2
R15 Interior/ R16 Exterior HL1, HL2, HL3

Fire Performance in general

EN 50265-2-1; IEC 60332-1; BS 4066-1 Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3C; Fire propagation of bunched wires and cables;
VDE 0472 Teil 804; BS 4066-3; NFC 32070
EN 50268-2; IEC 61034-2; VDE 0472 Teil 816 Smoke density
EN 50267-2-1; IEC 60754-1; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; VDE 0472 Teil 813 Corrosivity of gases (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Toxicity index
NFF 16101; NFF 63808; BS6853 Smoke index
EN45545-2 Requirement for fire behavior of materials & components R15/R16

FRL-TW-05MP-SW-IOS 300/500 V

NUMBER OF CORES AND NOMINAL CROSS SECTION MINIMUM THICKNESS OF SHEATH AT ANY POINT OVERALL DIAMETER WEIGHT
(mm2) (mm) min. (mm) max. (mm) (kg/km)
2 x 2 x 0.5 0.56 9.0 10.2 90
3 x 2 x 0.5 0.56 9.6 10.8 120
4 x 2 x 0.5 0.56 10.7 11.9 160
7 x 2 x 0.5 0.56 13.0 14.2 240
         
2 x 2 x 0.75 0.56 9.8 11.0 90
3 x 2 x 0.75 0.56 10.5 11.7 150
4 x 2 x 0.75 0.56 11.6 12.8 180
7 x 2 x 0.75 0.56 14.0 15.6 290
         
2 x 2 x 1.0 0.56 10.2 11.6 110
3 x 2 x 1.0 0.56 10.9 12.1 160
4 x 2 x 1.0 0.56 12.1 13.3 200
7 x 2 x 1.0 0.56 14.6 16.2 330
         
2 x 2 x 1.5 0.56 12.2 13.4 150
3 x 2 x 1.5 0.56 13.1 14.3 230
4 x 2 x 1.5 0.56 14.3 15.9 290
7 x 2 x 1.5 0.56 17.6 19.2 490